House Clock

Naturally, when you depend on the internet, it fails.  I now have a satellite based clock to sync the house for the various controls instead of using the NIS servers.  See the clock tab above or click here.

Thermostat Installed

Got remaining parts in and actually installed the thermostat.  It is working great and can actually be controlled over the network in my house.  Of course I won't put it on the web for other people to control since this could become a problem.  I updated the description and posted a picture of the installation.

Super Thermostat

I finally got far enough along on my thermostat work to start writing about it.  Currently it is in test mode setting on my dinner table.  I'm going to watch it for a while to be sure it doesn't lock up or behave erratically before I wire it into the house.  Besides, I have to build two of them and it takes some time to assemble.  The final form factor is still up in the air but I suspect it'll look a lot like the power monitor except smaller.  It's under the thermostat tab above.

Finished the Power Display

Finally got an enclosure and finished the power display.  Now it's installed in a wall displaying data and NIS based time.  I'm sure I'll be opening it up and adding things, but that's what computers are for.  I'll be able to concentrate on a smart home thermostat to control my heat pump now.   Click on the thermostat tab above for the description and final picture or click here.

My new power company meter is still working fine.  My demand level is hovering at 1.5kW: Totally COOL!  Interesting how the other meter had "nothing" wrong with it.

This time it was a letter.

Well, the power company sent me a letter and guess what?  The meter was perfect.  I sort of suspected that would be the result when they took it off the house and back to their shop to test it.  Now that they have the meter and their test results, there's really nothing further I can do.  However the news is not all frustrating.  The new meter they left seems to be working fine.  My demand usage has dropped to a level that corresponds to what my measurements are and my bill should be dropping accordingly.  Seems the highest demand I've had in the last three weeks is 1.5 KW which is a long ways from the 4.2KW I had three months ago.

It's disappointing that I couldn't prove that the meter was set up wrong, but what's one to do?

Just an update

Not being one to let something like this go, I dropped a note to the power company to try and make sure they actually tested the meter and let me know the results then called my contact at the government office.  A little later I got an email from the power company assuring me that the meter would be tested and the results forwarded.  Of course there will always be a nagging doubt about their response since they took the meter away, but what can you do?

Still haven't heard from the Power Company

Well, it's been a week since the power company was out.  Haven't heard a thing.   I suspect that I won't hear anything until I make a stink with the government again.  The new meter is setting at 1.3 kW which is the lowest it's ever been.  They could well have fixed my particular problem; interesting to see what comes of this over the next weeks.  I don't plan on going away.

Meanwhile, I've been working on a display computer.  It gets the time from NIS and the power from my monitor and displays them.  It also forwards the data to Pachube to free up the laptop.  I'm waiting on a couple of parts to finish it up and mount it to the wall in the house.  Then, it's a toss up between a device to control the two A/C units such that both of them cannot be on at the same time during peak periods or something to control the compressors on my refrigerator and freezer such that they can't be on at the same time.  I may just make the first web enabled home thermostat from an Arduino (at least I think it would be the first).